Stierlen - Mobile units

The mobile units for central meal distribution were developed by Stierlen after decades of research. With this experience, and well conceived in every detail, they are optimally equipped for active kitchens and prepared for efficient meal distribution. All functional parts are easy to access and exchange, to keep your maintenance cost as low as possible.  Also all of the Stierlen dispensers and serving trollies are manufactured according to VDE specifications.

The brand Stierlen stands for best quality, high-grade machines with functions that are perfectly coordinated, so that the distribution runs smoothly.  

... all round heat insulated

Stierlen tube dispenser

We offer heated or non-heated tube dispensers, as requested.  All units are designed for   maximum process simplicity and operation. The easy adjustment for all common-size plates, the uncomplicated operation, the height of the plate stack, and the continuous heat setting, illustrate the user benefits. The lifting plattform is detachable and enables easy cleaning of the inner walls and floor of the machine.  

Advantages

Handle

A sturdy sliding handle made of chrome-nickel steel makes maneuvering easier.

Chute

The interior lining of the chute allows stacking of smaller dishes in the square tube dispenser

Castors

The modern smooth-running castors, made of high-grade plastic, are rust-proof and resistant against cleaning fluids and disinfectants.

Plug

The electric plug and spiral cable are secured and protected from damage by the sliding handle.

Construction

Supporting structure, carriage, cover panel and hoisting plattform made entirely of chrome nickel steel 18/10

Surfaces

The outer surfaces have a matt finish, and therefore easy to clean.

… perfectly tempered

Stierlen platform dispenser

This stainless steel platform dispenser offers everything that today's meal distribution requires. Made completely of chrome nickel steel 18/10, the casing is sturdy and deformation-resistant. Stability, hygiene and durability are guaranteed. The heating is done by a thermostatically regulated electric air-circulation heater with a fan and overheat protection for an even heating of dishes. The outer panels have a matt finish, which make them easy to clean. A floor opening with a sealing cap facilitates easy cleaning of the interior. The free-moving hoisting plattform is built-in so it can't tilt over and equipped with a 16x ball bearing guide.

… efficient transport

Stierlen basket dispenser

Suited for porcellain dishes, system tableware, etc. for storage, transport and distribution. Structure, carriage, cover panel and hoisting platform are made completely of chrome nickel steel 18/10. Outer panels have a matt finish. The free-moving hoisting plattform, tilt-safe, with quadruple ball bearing roll guides, transport the baskets with the stacked dishes to the   appropriate height for handling by means of a spring mechanism. The spring tension can be adjusted for dishes of different weight by hinging and unhinging the main spring. For storage and provision of dishes in baskets for meal distribution.

… safe distribution

Stierlen tray dispenser

Suited for Euronorm or Gastronorm trays or for trays with measurements up to 410x575 mm. Structure, carriage, cover panel and hoisting platform are made completely of chrome nickel steel 18/10. Outer panels have a matt finish.   The free-moving hoisting plattform, tilt-safe, with quadruple ball bearing roll guides, bring the trays to an appropriate working height by means of a spring mechanism.The spring tension can be adjusted for trays of different weight by hinging and unhinging the main spring.

... optimal gestapelt

STIERLEN BASKET- & TRAY-STACKING TROLLEY

As an ideal supplement for  meal distribution, this trolley can be used for providing pre-portioned meals in baskets or trays. Tubular frame construction, supporting rail, unloading plate and sliding handles made completely of chrom nickel steel 18/10. Cover for the deposit of baskets, Euronorm-trays, microwave or similar. The upturn on both longitudinal sides provides slide protection. Tubular base with supporting rails for the admission of plastic baskets size  508x508mm or Euronorm trays. The height of the insertion grid is  138 mm.

… convincing distribution

STIERLEN MEAL DISTRIBUTION TROLLIES

Meal distribution trollies for providing warm meals on a portioning belt. Casing, cover, holding basin, lower frame and storage board are all made completely of chrome nickel steel 18/10. The outer panels have a matt finish. The casing panels are double-walled and heat-insulated with inlaid insulation pads. Every holding basin is electrically heated with tubular heating elements, and thermostatically regulated with overheat control. The temperature of the holding basins can be individually set up to + 95° C, and have a control lamp for the „on/off switch. An embossed basin identification on the operation- and right-side panel. Every basin has a ¾" drain with drain tap and can be optionally equipped with a CNS drain pipe, which goes all the way to the storage board.

...bestens vorgereinigt

STIERLEN CUTLERY IMMERSING TROLLIES & STATION TROLLIES

Cutlery immersing trollies: Casing, cover,  holding basin, lower frame and the welded storage board are all made completely of chrome nickel steel 18/10. The outer panels have an easy-care matt finish.The casing panels are double-walled and heat-insulated with inlaid insulation pads. The extreme basin depth of  300mm ensures complete immersion of vertical cutlery supports. The basin is lectrically heated with tubular heating elements, for heating and holding the temperature of the cleaning fluid(up to 50°C), and thermostatically regulated with overheat control. Operation is done with an „on/off“ switch and a separate control lamp. Generously dimensioned draining with a  ¾" drain with drain tap. Accessories: CNS drain pipewhich goes all the way to the storage board. Sturdy storage board for storing cutlery baskets.

Station platform-trollies for use with the Stierlen CombiSet trays on the meal-portioning belt, and their transport to the different stations. Open version made of CNS 18/10, with matt finish, storage board, and lower frame for accomodating up to 30 Stierlen CombiSets. A folding board is located on the face side. The empty trollies can be telescoped for space-saving storage.

... stable construction

STIERLEN STACKING- & SHELF TROLLIES

Shelf trollies for the placement of STIERLEN CombiSet- upper- and lower parts, or  serving trays for the dishwasher and after cleaning on the portioning belt. Sturdy construction in CNS 18/10. With four welded grids. The grids are made of  4,0 mm thick, transverse chrome nickel steel wires with two support bearers. Longitudinal U-profiles provide more stability and torsional stiffness. The face-side of the trolley is reinforced with two vertically welded round bars.

... safe stacking

STIERLEN PLATE TROLLIES

Perfectly suited for the storage of stackable plates and bowls. The supporting frame  made of square tube, is cased in smooth-surfaced chrome nickel steel 18/10. The castors are rust-proof and resistant to disinfectants and cleaning fluids.

Hier finden Sie die häufigsten Fragen zum Thema Topfspülmaschinen. Gerne beantworten wir auch Ihre spezifische Frage. Hier gehts zur Kontaktseite >>

RELIABLE PERFORMANCEthrough perfect workmanship
LONGTIME EXPERIENCEin the market since 1889
100% QUALITYcertified brand-name products
COMPETENT SERVICEmore than 20 Sales- & Service locations